 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
 |
| RESIBLOCK E.R. |
Based on rapid-action surfactants
and wetting agents, RESIBLOCK E.R. is a highly effective
way to remove lime salts from block paving.RESIBLOCK E.R.
will also remove unwanted deposits of mortar, cement, slurry
and significantly reduce rust and oil stains from block paving and
bricks. Ideal for cleaning stone, slate, quarry tiles, ceramics,
pre-cast panels and old concrete floors. It will also remove cement
based paints. |
|
After wetting the pavers first to reduce absorbency, apply RESIBLOCK E.R. liberally on to entire area using a soft broom and agitate with a nylon brush ensuring it does not dry out while in use. When the reaction has stopped, rinse the area thoroughly. The procedure is repeated as necessary. Always test on an inconspicuous area first, as dilution may be required. Allow at least 2 weeks to check for re-appearance of lime salts before sealing with RESIBLOCK '22' / SUPERIOR paving sealers. |
|
| RESICLEAN |
RESICLEAN is a solvented cleaner designed
to swiftly remove all RESIBLOCK Sealants from rollers, brushes,
and squeegees (before they have dried out). This product is also
ideal for removing splashes and spills of uncured RESIBLOCK
Sealers from most hard surfaces. |
|
RESIBLOCK O.R. |
RESIBLOCK O.R. is formulated
to remove oil, grease and diesel and all hydrocarbons from concrete
block paving. It is also ideal to remove heavily impacted oils and
greases from warehouse/garage floors. No special tools or equipment
are required and it can be effectively used for many other heavy
duty cleaning purposes. Apply O.R. to the stain, agitate
with a bristle brush, allow to soak for 15 minutes and rinse thoroughly
with detergent and pressure washer. Repeat as necessary. |
|
Please refer to latest application instructions and Safety Data sheets before usage.
 |
to top |